The reciprocating valve of the internal grinder needs to be sensitive in the process of operation, and the stroke stop in the equipment needs to be adjusted effectively according to the length of the workpiece to be ground. It is fastened and reliable during use. It needs to be slow during the first feed. When measuring the workpiece with a plug gauge or meter, the grinding wheel must exit the workpiece and stop steadily.
When the internal grinding machine is compensated or fed, it is mainly performed by two transmission mechanisms that do not interfere with each other. In this way, the forehead feed system in the equipment will have a fixed-range grinding function when in use, and the entire equipment will effectively use it. Two feed modes, hydraulic and manual.
The internal grinder is effectively equipped with a quick jump mechanism, so the equipment does not need to manually set the tool after it exits the grinding wheel for measurement or trimming. The work table is equipped with an intermediate stop device for fast retraction. The retraction distance can be adjusted as needed to reduce auxiliary time .
The start handle on the worktable of the internal grinding machine will be effectively equipped with a safety interlock device, which will effectively ensure the safety during the loading and unloading and measuring work to a certain extent. The maximum speed of the grinding wheel shaft of the machine tool is 24000 rpm To improve the grinding of small holes.
Internal grinders can be divided into universal internal grinders and ordinary internal grinders when used. The former is the most widely used grinder in the market, and its equipment is capable of grinding various shafts and sleeves. Face, inner cone face and stepped shaft end face, etc.
The main part of the internal grinding machine is the bed, the bed is the basic support of the grinding machine, and the workbench, headstock, grinding wheel holder, tailstock, etc. will be effectively installed on the top of the part, which will make these parts work It can effectively maintain accurate relative position during the process, and the inside of the bed is used as an oil pool for hydraulic oil
