The centerless grinder is particularly suitable for use in a small installation space, and can meet the requirements of simplification and space saving of various production lines. Since the dressing unit of the grinding wheel is arranged at a downwardly inclined position above the grinding wheel, there is no need to leave a space for the dressing unit on the side of the grinding wheel, which is most closely related to the lateral size of the traditional centerless grinder.
Let me share some advice on the appearance and maintenance of the centerless grinder
1. The appearance of the centerless grinder, the motor, and the surface of the heat dissipation device must be kept clean, and the polishing consumable powder must be cleaned regularly.
2. Check and tighten the handle, feed handwheel, screws, nuts and other parts to keep the machine in good condition.
3. Overall inspection of the centerless grinder: check the looseness of the screws, belts and looseness of the parts of the centerless grinder. The looseness should be adjusted appropriately.
4. Check whether the wear degree of each bearing is damaged and whether the lubricating oil is sufficient.
5. The guide rail should be clean, and the guide rail must not carry polishing consumable powder.
6. Electrical equipment: regularly clean the motor and electrical box. The electrical appliances are fixed and tidy, and the action is reliable.
7. Check and tighten the zero connection device. Check the button switch of the centerless grinder. If there is any problem, replace it immediately to avoid unnecessary danger.
Previous: The Reason And Operation Method Of Inaccurate Feed Of Centerless Grinder
Next: No Information
