The centerless grinder can automatically dress and compensate automatically. The guide wheel feed guide is a double V-shaped needle roller guide wheel, which is mainly fed by a servo motor, which can compensate each other with the dressing of the grinding wheel. The machine tool is equipped with an automatic loading and unloading mechanism, capable of automatic circular grinding.
Let's share the key maintenance parts of the centerless grinder.
1. Mass production can only be carried out after passing the test.
2. After starting the production, the operator must self-check and record the first sample in accordance with the work instruction.
3. When there is an abnormality in the production process, stop the machine and report it immediately and fill in the relevant form.
4. When shutting down, switch the water pump motor to the OFF position to stop the water supply, and take out the work objects stuck in the machine tool.
5. The grinding wheel and guide wheel should be idling for more than 5 minutes to stop the water supply to avoid imbalance of the grinding wheel when the machine is turned on again. After the water is dried, the power switch of the grinding wheel and guide wheel is turned OFF.
6. After the grinding wheel and guide wheel stop, the oil pressure switch can be turned to OFF position.
