A centerless grinder is a type of grinding machine that does not require the positioning of the axis of the workpiece to perform grinding. It is mainly composed of three mechanisms: a grinding wheel, an adjusting wheel and a workpiece support. The grinding wheel actually performs the grinding work. The adjusting wheel Control the rotation of the workpiece and control the feed speed of the workpiece.
1. The surface maintenance of the centerless grinder: the surface of the centerless grinder, the motor, and the surface of the heat sink must be kept clean, and the polishing consumable powder must be cleaned regularly.
2. Check and tighten the handle, feed handwheel, screws, nuts and other parts. Keep the machine tool in good condition.
3. Whole machine inspection of centerless grinder: check the screws, belts and tightness of each part of the centerless grinder. The loose ones should be adjusted until they are suitable.
4. Check the wear degree of each bearing if it is damaged, replace it, and whether the lubricating oil is sufficient.
5. The guide rail should be cleaned up, and there should be no polishing consumable powder on the guide rail.
6. Electrical appliances: clean the motor and electrical box regularly. The electrical device is fixed and tidy, and the action is reliable.
